You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Hier ist alles, was Sie wissen müssen
The Pixsys ATR171-11ABC is a PID temperature controller that comes in a size of 72x72mm. It is a multi-setpoint controller with one analogue input that is selectable for a wide variety of sensors, or can be related to mathematical functions. The SSR and relay outputs are programmable as command, alarm and event. Its extended power supply range of 24...230 VAC/DC with galvanic isolation means one model of temperature controller can be used for a diverse range of applications.
These temperature/PID controllers are easy to use and can be set up quickly. The programming and monitoring software LabSoftView is easy to use whilst the memory card slot on the unit makes setting up one or more temperature controllers extremely quick and simple. See below for more detailed specifications about the ATR171-11ABC.
Box | 72x72 (front panel) x 99mm |
Power supply | 24...230VAC/DC ±15% 50/60Hz |
Consumption | 5.5 VA |
Display | 4 digits 0.5" green + 4 digits 0.3" red + 6 signalling LEDs |
Operating conditions | Temperature 0-45°C, 35...39 RH% |
Material | Box: Noryl UL94V1 self-extinguishing; front panel: silicon rubber V0 |
Weight | Approx. 250g |
Sealing | Front panel IP54 (with gasket), box IP30, terminal blocks IP20 |
Quick set-up options | Memory card with/without battery, software LABSOFTVIEW, EASY-UP codes |
1 configurable | Selection TC, K, J, S, R, PT100,PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4..20 mA, 0..10 V, 0...40mV, Potentiometer 1...6/160 Kohm. |
Sampling time | 4.1ms (frequency 242 Hz) |
1 digital input | 1...4 setpoints selection, Hold, Run |
1 Relay | 1 Relay 8 A - 250 VAC resistive charge |
1 Analogue | Selection SSR 12VDC - 30mA / 0...10V / 4...20mA |
Control algorithms | ON-OFF with hysteresis, P., P.I., P.I.S., P.S. time proportioned. Automatic / Manual regulation |
Tuning | Manual/Automatic |
Data protection | Lock of command/alarm setpoint - Access to parameters by password |
Alarm modes | Absolute/Threshold, band, High/Low deviation. Alarm with optional manual reset and activation delay. Dead band function |
Soft-start | Rising gradient expressed as Degrees/Hour |
Double P.I.D. | Heating/Cooling P.I.D. |
Programmer function | 3 steps pre-programmed cycle with start/stop |
Timer function | Controller function + decremental timer |
Die nachfolgenden Angaben beziehen sich auf dieses Produkt
Manufacturer | Pixsys |
---|---|
IP Rating | IP65 |
Range | ATR |
Range type | Temperature Controller |
RS485 Modbus | 0 |
No of ssr outputs | 1 |
No of relay outputs | 1 |
Type of Outputs | relay / ssr |
Number of Outputs | 2 |
Input Type | K / J / S / R / PT100 / PT500 / PT1000 / Ni100 / PTC1K / NTC10K (B 3435K) / 0..20 mA / 4..20 mA / 0..10 V / 0...40mV / Potentiometer 1...6/160 Kohm. |
No analogue inps | 1 |
---|---|
Supply Voltage | 24???230V AC/V DC |
Display Type | led |
Panel Depth | 99 |
Front Size | 72x72mm |
Control Function | ON-OFF / PID / Programmed cycle / Programmed Cycle / Double PID |
Display Colour | green / red |
No of display lines | 2 |
Digit Display | 4x2 |
Hier sind einige PDF-Dateien können Sie herunterladen