You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Hier ist alles, was Sie wissen müssen
The ATR243-20ABC is ideal for end users as it features a universal analogue input selectable for over 15 different types of sensor and extended wide range power supply (24...230 VAC/DC). Increased flexibility is added with SSR-Relay-V/mA outputs, which are programmable as command/alarm/event, or analogue retransmission. With its wide ranging power supply and universal input type you would be hard pressed to find an application that the ATR243 won't cover. This means if you have machinery of different ages and manufacturers in your facility, with a number of different temperature controllers you can stock one model to cover all of your different applications.
The ATR243 is also great for equipment manufacturers and panel builders. Programming the ATR243-20ABC is a piece of cake thanks to LabSoftView, and configuring more than one temperature controller can be done in seconds thanks to the handy memory card slot on the slide of the unit, you don't even need to apply power to the unit to program it with the memory card.
Features | 1 Analogue input + 2 Relays 5 A or 1 Relay 5 A + 1SSR/V/mA |
Dimensions | 48x48 (front panel) x 125 mm |
Power Supply | 24...230VAC/DC ±15% 50/60 Hz (galvanic isolation) |
Consumption | 5,5 VA 4W |
Display | 4 digits 0,4 " green + 4 digits 0,3" red |
Operating conditions | Temperature 0-45 °C, humidity 35..95 uR% |
Material | Box: Noryl UL94V1 self-extinguishing, front panel: PC ABS UL94V0 self-extinguishing |
Weight | Approx. 165 g (-20ABC) -185 g (-21ABC/31ABC) |
Sealing | IP65 (Front panel) , IP20 (Box and Terminal bloks) |
Quick set-up options | Memory Card with / without battery, software LABSOFTVIEW, or EASY-UP codes |
1 x Configurable Input | Selection TC, K, J, S, R, PT100,PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4..20 mA, 0..10 V,0...40mV, Potentiometer 1...6/160 Kohm, T.A (1024 points) |
Sampling Time | Programmable up to 4,1 ms (Frequency up to 242 Hz) |
1 x Digitial Input | 1/2...4 setpoint change , Hold, Run, Tuning launch, Start/stop cycle |
1 x T.A Input | Selection T.A. 50 mA - 100 ms - 1024 points (codes -21/-31ABC) |
2 x Relays | Relay 5 A - 250 VAC resistive charge |
1 x SSR | 12 VDC - 30 mA max |
1 x Analogue | Selection 4 - 20 mA or 0 - 10 Vdc for command or retransmission PV/SPV |
Serial communication | None |
Control algorithms | ON - OFF with hysteresis, P., P.I., PID., P.D. time proportioned |
Tuning | Manual or automatic |
Data protection | Lock of control / alarm setpoint, Access to parameters by password |
Alarm modes | Absolute / Threshold, Band, High / Low deviation. Alarm with optional manual reset. Loop Break Alarm function |
Auto / Man function | Output percentage command also with automatic change in case of sensor failure |
Double P.I.D. | Heating / Cooling P.I.D. |
Programmer function | Start / Stop pre-programmed cyle with 2/3 steps |
Soft-Start | Rising gradient expressed as Degrees / Hour |
Open / Close logic | Open / Close logic for motorized valves |
Die nachfolgenden Angaben beziehen sich auf dieses Produkt
Manufacturer | Pixsys |
---|---|
IP Rating | IP65 |
Range | ATR |
Range type | Temperature Controller |
Analogue output | 1 |
No of ssr outputs | 1 |
No of relay outputs | 2 |
Type of Outputs | Analogue / relay / ssr |
Number of Outputs | 2 |
Input Type | 0...40mV / 0..10 V / 0..20 mA / 4..20 mA / J / K / Ni100 / NTC10K (B 3435K) / Potentiometer 1...6/160 Kohm / PT100 / PT1000 / PT500 / PTC1K / R / S |
No digital inps | 1 |
No analogue inps | 1 |
---|---|
Supply Voltage | 24???230V AC/V DC |
Display Type | led |
Panel Depth | 125 |
Front Size | 48x48mm (1/16 din) |
Control Function | Dead Band / Double PID / ON-OFF / Open/Close Valve Logic / PID / Programmed cycle / Programmed Cycle / Soft Start / Time Proportioned |
Display Colour | green / red |
No of display lines | 2 |
Digit Display | 4x2 |
Setpoints | 2 |
Hier sind einige PDF-Dateien können Sie herunterladen