You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Voici tout ce que vous devez savoir
The Pixsys ATR142-ABC is a 32x74mm , single control loop, 3 setpoint controller. This multi-setpoint controller provides a user-friendly operation with programming tools for quick set up. Pixsys temperature controllers are suitable for a variety of applications and users, including panel builders, OEMs and end users. The universal analogue input is selectable for a wide range of sensors. Northern Industrial supply a variety of Pixsys temperature controllers in both new and used condition. See specifications for the ATR142-ABC multisetpoint temperature controller below.
Part Number | ATR142-ABC |
Box | 32x74 (front panel) x 53 mm |
Power Supply | 24...230 VAC/DC ±15% 50/60 Hz |
Consumption | 2 W |
Display | 4 digits 0.4 inch green + 4 digits 0.3 inch red + 6 signalong LEDs |
Operating Conditions | Temperature 0-45°C, humidity 35...95 RH% |
Material | Box: Noryl UL94V1 self-extinguishing; front panel: PC ABS UL94V0 self-extinguishing |
Weight | Approx. 112 g |
Sealing | Front panel IP65 (with gasket), |
Quick Setup Options | Memory Card with/without battery, software LABSOFTVIEW, EASY-UP codes |
1 Configurable | Selection TC, K, J, S, R, PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4..20 mA, 0..10 V, 0..40mV, Potentiometer 1...6/160 Kohm |
Sampling Time | 4.1 ms (Frequency 242 Hz) |
1 Digital Input | 1/2 setpoint selection, Hold, Run (only if TC, 0...10V, 0/4...20mA, 0...40mV) |
2 Relays | 1 Relay 8A - 250 VAC resistive charge + 1 relay 5 A - 250 VAC resistive charge |
1 SSR | 12 VDC - 30 mA |
Control Algorithms | ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned, dead band |
Tuning | Manual or automatic |
Data Protection | Lock of command/alarm setpoint - Access to parameters by password |
Alarm Modes | Absolute/Threshold, band, high/low deviation. Alarm with optional manual reset |
Soft-Start | Rising gradient expressed as degrees/hour |
Double P.I.D. | Heating/Cooling P.I.D. |
Programmer Function | Start/Stop, 3 steps pre-programmed cycle |
Timer Function | Controller function + single/double timer |
Open/Close Logic | Open/Close logic for motorised valves |
Les spécifications ci-dessous sont applicables à ce produit
Manufacturer | Pixsys |
---|---|
IP Rating | IP65 |
Range | ATR |
Range type | Temperature Controller |
RS485 Modbus | 0 |
No of ssr outputs | 1 |
No of relay outputs | 2 |
Type of Outputs | relay / ssr / RS485 modbus |
Number of Outputs | 3 |
Input Type | K / J / S / R / PT100 / PT500 / PT1000 / Ni100 / PTC1K / NTC10K (B 3435K) / 0..20 mA / 4..20 mA / 0..10 V / 0...40mV / Potentiometer 1...6/160 Kohm |
No digital inps | 1 |
No analogue inps | 1 |
---|---|
Supply Voltage | 24???230V AC/V DC |
Display Type | led |
Panel Depth | 53 |
Front Size | 32x74mm |
Control Function | ON-OFF / PID / Time Proportioned / Dead Band / Open/Close Valve Logic / Soft Start / Programmed cycle / Programmed Cycle |
Display Colour | green / red |
No of display lines | 2 |
Digit Display | 4x2 |
Setpoints | 3 |
Voici quelques fichiers PDF, vous pouvez télécharger