You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Voici tout ce que vous devez savoir
The Pixsys STR551-12ABC-T is a 96x48 indicator that is designed to acquire and re-transmit process signals. Like other Pixsys products, the STR551 is very configurable meaning you can use the same panel meter for a wide range of temperature sensors and process signals in mA and Volts.
These panel meters have a monochromatic OLED graphic display which allow the user to visualise process trends with programmable sampling times through graphs. Mathematical functions linked to process value, including totaliser and sum, are also available. Connectivity is guaranteed by RS485 with Modbus RTU/Slave protocol.
When you install your STR551 panel meter you can choose between a horizontal or vertical installation to make the most out of your space. A multilingual interface and intuitive menus make set up and monitoring easy and straightforward.
Box | 96x48 (Front panel) x 48mm (1/8Din) |
Power supply | 24...230VAC/DC ±10% 50/60 Hz (galvanic isolation 2500V) |
Consumption | 6 VA |
Display | OLED (monochromatic yellow) |
Operating conditions | Temperature 0-45 °C, humidity 35..95 RH% (non condensing) |
Material | Box: Polycarbonate V0 |
Weight | Approx. 165g |
Sealing | Front panel: IP54 (IP65 with gasket) - Box and Terminal blocks:IP20 |
Quick set-up options | Software LABSOFTVIEW and/or Memorycard |
Wiring | Extractable terminal blocks, spring lock |
Inputs | |
1 Analogue | Res.16 bit, Selectable for TC type K, S, R, J, T, E, N, B (automatic compensation of the cold junction 0..50 °C, ± 0,2% F.S. ± 1 Digit F.S.), thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (β 3435K), process signals 0-10 V(54000 points), 0/4-20mA(40000 points), 0-60 mV (16000 points), Potentiometer 6 KΩ, 150 KΩ (50000 points) Customizable linear input (max 16 steps) |
2 Digital | PNP inputs programmable for Run / Hold / Tare-Zero / Alarms reset/ Peaks reset/ Totalizer reset / Activate-Reset Sum / Parameters-Setpoint Lock |
Sampling time | 4.1 ms (Frequency from 4,12 Hz to 242 Hz) |
Outputs | |
2 Relays | 2A - 250VAC (resistive charge) |
2 Analogue | 1 output 0...10V (60000 points) - 1 output 0/4...20mA (60000 points) |
1 Auxiliary | 24 VDC - 30mA for external sensors supply (loop-powered) |
Serial communication | RS485 Modbus RTU - Slave (1200...115200 Baud) galvanically isolated from Power supply/Inputs/Outputs |
Software features | |
Alarms regulation | ON - OFF with hysteresis |
Alarm mode | Absolute / Threshold, Band with instantaneous/delayed/retentive/by digital input activation, Sensor failure / Activation by serial line |
Sum function | Sum different process measurements over time By digital input or by keyboard |
Totaliser function | Visualisation of instant process value and total value since last reset |
Trend visualisation | Trend visualisation with selectable time basis 1 to 3600s |
Analogue retransmission | Process values / Setpoints |
Digital transmission via RS485 | Process values / Setpoint / Parameters |
Latch-on function | Semi-automatic setting of limits/ calibration values for analogue input |
Text menus | English/Italian/German/French/Spanish |
Measure unit visualisation | Selection of different measuring units |
Les spécifications ci-dessous sont applicables à ce produit
Manufacturer | Pixsys |
---|
Range type | Panel Meter |
---|
Voici quelques fichiers PDF, vous pouvez télécharger