You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Ecco tutto quello che c'è da sapere
The Omron CJ1W-NC413 is a 4 axis position control module for the CJ-series of programmable logic controllers. The module receives instructions from the PLC's work area and output pulse trains to various motor drivers for positioning. This module has a number of key features including:
The CJ1W-NC413 responds to instructions from the CPU module within 2 ms.
The module can be controlled in two different ways. The first method is direct operation where the target position and target speed are set each time from the processor module. The first method is where the program used to control positioning is transferred to the CJ1W-NC413 and then specified for position control.
The Omron CJ1W-NC41 provides linear interpolation control for all 4 axis. Open collector output or line driver output is available for any number of control axis.
A stepper drive and a servo drive with a pulse train input can be connected to the CJ1W-NC413. A nice feature of the modules is that you can set different operating modes for different axes allowing the combined use of different types of motor drive.
When an interrupt is input during pulse output, positioning is continued for only a specified amount and then stopped
with the NC413 positioning is possible over a wide range with speed precision. Position can be performed for positions in the range -1,073,741,823 to 1,073,741,823 pulses and speeds in the range 1 to 500,000 pps in 1 pulse units.
The amount of data that can be set for memory operation are showing in the following table
Type of Data | Number of data items per axis |
Positioning sequences, speeds, positions | 100 |
Acceleration times, deceleration times | 9 |
Dwell times | 19 |
Zones | 3 |
The data items are transferred to the CJ1W-NC413. Once they have been transferred to the PCU they can be saved to the modules flash memory, so there is no requirement to build battery maintenance into your maintenance schedule.
The Omron CJ1W-NC413 is compatible with CX-Position, the Windows based NC support software. Using the CJ-series single port multi access function, creation and transfer of parameter and data for PCU in a windows environment. Using the CJ-series single port multi-access function, creation and transfer or parameters and data for PCUs as well as operation monitoring are possible from the saem environment as the software used for the CPU unit ladder programming (CX-Programmer).
Le specifiche di seguito si applicano a questo prodotto
Manufacturer | Omron |
---|---|
Range type | Motion Control Module |
Range | SYSMAC CJ1 Series |
---|
Qui ci sono alcuni file PDF che è possibile scaricare