You will get en email confirming that we have received your enquiry.
Starting at 260,78 €
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Ecco tutto quello che c'è da sapere
The Control Techniques UD50 is an extended I/O module for drives from the Unidrive series. This module enables you to increase system I/O for a more complex drive system application, and the I/O is also software programmable. Each UD50 has 2 programmable relays, 3 digital inputs, 3 digital (selectable) inputs or outputs, 2 analog voltage inputs and 1 analog voltage output. See more specifications for the UD50, which is available at Northern Industrial, below.
Type | Single ended complies with IEC 1131 (Positive logic only) |
Mode | Positive or negative logic |
Input voltage range | -15 V to 33 V |
Threshold | 10 V to 13 V |
Input current at 15 V (Positive logic) | +2 mA to +3 mA (current flow into the drive) |
Input current at 15 V | -1.25 mA to -2 mA (current flow out of the drive) |
Input current at 5 V (Positive logic) | +0.5 to +1 mA (between 1/2 and 1 mA flowing into the drive) |
Input current at 5 V (Negative logic) | <-2.5 mA (more than 2.5 mA flowing out of the drive) |
Type | Single ended i.e. wrt 0VAOP |
Mode | Voltage only - bi polar |
Input voltage working range | + or - 9.996 V |
Absolute max. input | -15 V to 33 V |
Input impedence | 20 K Ohms |
Resolution | 10 bits plus sign |
Gain accuracy | 2% |
Sign error (max) | + or - 5 MV WRTOV |
Type | Single ended complies with IEC 1131 (Positive logic only) |
Input modes | Positive or negative logic |
Input voltage range | -15 V to 33 V |
Output threshold | 10 V to 13 V |
Input current at 15 V (Positive logic) | +2 mA to +3 mA |
Input current at 15 V | -1.25 mA to -2 mA |
Input current at 5 V (Positive logic) | +0.5 to +1 mA |
Input current at 5 V (Negative logic) | <-2.5 mA |
Output type | push-pull or open collector (upper stage inactive) |
Output voltage high | 20.5 V to 27 V at -30 mA |
Output voltage low | 0 V to 3 V at + or - 30 mA |
Maximum applied voltage in output mode | -15 V to 33 V |
Maximum total current | + or - 30 mA |
Protection | Current limit active at all times |
Type | Single ended i.e. wrt 0VAOP |
Mode | Voltage only - bi polar |
Output working range | -10 V to + 10 V Absolute |
Maximum applied voltage | -15 V to 33 V |
Minimum output current | + or - 10 mA |
Gain accuracy | + or - 1.6% |
Maximum load resistance | 1 K Ohm |
Maximum load capacitance | 159 nF |
Le specifiche di seguito si applicano a questo prodotto
Manufacturer | Control Techniques |
---|---|
Range type | Interface Module |
Range | Unidrive |
---|
Qui ci sono alcuni file PDF che è possibile scaricare