You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Here is all you need to know
The Mitsubishi A61P-UL is the same is a A61P except it has UL approval. It is a power supply module for the Mitsubishi A Series. This family of PLCs are modular in design which enables you to select the CPU, power supply, special function modules, I/O modules and communication modules that are best suited to your application. At least one power supply needs to be inserted into the CPU base. Additional power supplies may be needed if you are using A65B or A68B extension base units. Northern Industrial can provide the advice, spares and repairs you need for A Series power supply modules.
Base loading position | Power supply module loading slot |
Input voltage | 100 to 120 V AC (85 to 132 V AC) |
Input voltage | 200 to 240 V AC (170 to 264 V AC) |
Input frequency | 50 / 60 Hz = 5% |
Max. input apparant power | 160 VA |
Inrush current | 20 A, within 8 ms |
Rated output current (5 V DC) | 8 A |
Overcurrent protection (5 V DC) | 8.8 A or higher |
Overvoltage protection (5 V DC) | 5.5 to 6.5 V |
Efficiency | 65% or higher |
Dielectric withstand voltage | Between all AC external terminals and ground: 1500 V AC for 1 min. Between all DC external terminals and ground: 500 V AC for 1 min. |
Noise immunity | Noise voltage: 1500 Vp-p |
Insulation resistance | Between all AC external terminals and ground: 5 M ohms or higher, measured with a 500 V DC insulation resistance tester |
Power indicator | Power LED display |
Terminal screw size | M4 x 0.7 x 6 |
Applicable wire size | 0.75 to 2 mm2 |
Applicable crimping terminal | R1. 25-4, R2-4, RAV 1.25, RAV 2-4 |
Applicable tightening torque | 118N-cm |
External dimensions (W x H x D) mm | 55 x 250 x 121 |
Weight | 0.75kg |
Allowable momentary power failure time | 20 ms or less |
The below specs apply to this product
Manufacturer | Mitsubishi |
---|---|
Range type | Power Supply |
Range | Melsec A Series |
---|
Here are some PDFs you can download