You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Here is all you need to know
Measuring 32x74 mm, the Pixsys ATR142-ABC-T is a single loop temperature controller with 3 setpoints. The ATR142-ABC-T multi-setpoint controller features serial communications via RS485-ModbusRTU and has an extended supply range of 24...230VAC. Pixsys temperature controllers provide user-friendly operation alongside programming tools for quick set up and monitoring software to monitor your controller. Pixsys manufacture a selection of multi-setpoint temperature controllers, see if the ATR142-ABC-T is the right one for you by viewing the specifications below.
Part Number | ATR142-ABC-T |
Box | 32x74 (front panel) x 53 mm |
Power Supply | 24...230 VAC/DC ±15% 50/60 Hz |
Consumption | 2 W |
Display | 4 digits 0.4 inch green + 4 digits 0.3 inches red + 6 signalling LEDs |
Operating Conditions | Temperature 0-45°C, humidity 35...95 RH% |
Material | Box: Noryl UL94V1, self-extinguishing ; front panel: PC ABS UL94V0 self-extinguishing |
Weight | Approx. 112 g |
Sealing | Front panel IP65 (with gasket), Box IP30, Terminal blocks IP20 |
Quick Setup Options | Memory card with/without batter, software LABSOFTVIEW, EASY-UP codes |
1 Configurable | Selection TC, K, J, S, R, PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4...20mA, 0...10V, 0...40mV, Potentiometer 1...6/160 kohm |
Sampling Time | 4.1 ms (frequency 242 Hz) |
1 Digital Input | 1/2 setpoint selection, hold, run (only if TC, 0...10V, 0/4...20mA, 0...40mV |
Outputs
2 Relays | 1 relay 8A-250 VAC resistive charge + 1 relay 5A-250 VAC resistive charge |
1 SSR | 12VDC - 30mA |
Serial Communication | RS485 Modbus RTU - Master/Slave |
Control Algorithms | ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned, dead band |
Tuning | Manual or automatic |
Data Protection | Lock of command/alarm setpoint - Acces to parameters by password |
Alarm Modes | Absolute/Threshold, band, high/low deviation. Alarm with optional manual reset |
Soft-Start | Rising gradient expressed as degrees/hour |
Double P.I.D. | Heating/Cooling P.I.D. |
Programmer Function | Start/Stop, 3 steps pre-programmed cycle |
Timer Function | Controller function + single/double timer |
Open/Close Logic | Open/Close logic for motorised valves |
The below specs apply to this product
Manufacturer | Pixsys |
---|---|
IP Rating | IP65 |
Range | ATR |
Range type | Temperature Controller |
RS485 Modbus | 1 |
No of ssr outputs | 1 |
No of relay outputs | 1 |
Type of Outputs | relay / ssr / RS485 modbus |
Number of Outputs | 3 |
Input Type | K / J / S / R / PT100 / PT500 / PT1000 / Ni100 / PTC1K / NTC10K (B 3435K) / 0..20 mA / 4..20 mA / 0..10 V / 0...40mV / Potentiometer 1...6/160 Kohm |
No digital inps | 1 |
No analogue inps | 1 |
---|---|
Supply Voltage | 24???230V AC/V DC |
Display Type | led |
Panel Depth | 53 |
Front Size | 32x74mm |
Control Function | ON-OFF / PID / Time Proportioned / Dead Band / Open/Close Valve Logic / Soft Start / Programmed cycle / Programmed Cycle |
Display Colour | green / red |
No of display lines | 2 |
Digit Display | 4x2 |
Setpoints | 3 |
Here are some PDFs you can download