You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Here is all you need to know
The Pixsys ATR171-23ABC-T is part of the ATR171 series of temperature controllers. This temperature controller differs from the rest in the series as it has support for RS485 serial communication. It also has two analogue inputs and three relay outputs, as well as an extended power range of 24...230 VAC/DC like the rest of the PID controllers in the ATR171 series.
The controller's inputs are selectable for a wide range of sensors and can be used to relate them to mathematical functions, whilst the outputs are programmable as command, alarm, event or analogue retransmission. These controllers measure just 72x72mm and have a four digit display. Take advantage of the compatible LabSoftView software and memory slot on the multi-setpoint temperature controller for easy set up, programming and monitoring of the ATR171-23ABC-T. See below for more detailed technical information.
Box | 72x72 (front panel) x 99mm |
Power supply | 24...230VAC/DC ±15% 50/60Hz |
Consumption | 5.5 VA |
Display | 4 digits 0.5" green + 4 digits 0.3" red + 6 signalling LEDs |
Operating conditions | Temperature 0-45°C, 35...39 RH% |
Material | Box: Noryl UL94V1 self-extinguishing; front panel: silicon rubber V0 |
Weight | Approx. 250g |
Sealing | Front panel IP54 (with gasket), box IP30, terminal blocks IP20 |
Quick set-up options | Memory card with/without battery, software LABSOFTVIEW, EASY-UP codes |
1 configurable | Selection TC, K, J, S, R, PT100,PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4..20 mA, 0..10 V, 0...40mV, Potentiometer 1...6/160 Kohm. |
1 configurable | Selection TC, K, J, S, R, PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K) |
Sampling time | 4.1ms (frequency 242 Hz) |
3 Relays | 3 Relays 8 A - 250 VAC resistive charge |
1 Analogue | Selection SSR 12VDC - 30mA / 0...10V / 4...20mA as command or retransmission setpoint-process |
Serial communication | RS485 Modbus RTU - Slave |
Control algorithms | ON-OFF with hysteresis, P., P.I., P.I.S., P.S. time proportioned. Automatic / Manual regulation |
Tuning | Manual/Automatic |
Data protection | Lock of command/alarm setpoint - Access to parameters by password |
Alarm modes | Absolute/Threshold, band, High/Low deviation. Alarm with optional manual reset and activation delay. Dead band function |
Soft-start | Rising gradient expressed as Degrees/Hour |
Double P.I.D. | Heating/Cooling P.I.D. |
Programmer function | 3 steps pre-programmed cycle with start/stop |
Timer function | Controller function + decremental timer |
Remote setpoint | Command setpoint corresponding to AI1 4...20 mA/0...10 V |
Double input mode | AI1 and AI2 input correlation as mean, difference or addition of process |
The below specs apply to this product
Manufacturer | Pixsys |
---|---|
No analogue inps | 2 |
Range | ATR |
Range type | Temperature Controller |
Analogue output | 1 |
RS485 Modbus | 1 |
No of ssr outputs | 1 |
No of relay outputs | 3 |
Type of Outputs | relay / ssr / RS485 modbus |
Number of Outputs | 4 |
Input Type | K / J / S / R / PT100 / PT500 / PT1000 / Ni100 / PTC1K / NTC10K (B 3435K) / 0..20 mA / 4..20 mA / 0..10 V / 0...40mV / Potentiometer 1...6/160 Kohm. |
No digital inps | 1 |
---|---|
IP Rating | IP65 |
Supply Voltage | 24???230V AC/V DC |
Display Type | led |
Panel Depth | 99 |
Front Size | 72x72mm |
Control Function | ON-OFF / PID / Programmed cycle / Programmed Cycle / Double Input Mode / Double PID |
Display Colour | green / red |
No of display lines | 2 |
Digit Display | 4x2 |
Here are some PDFs you can download