You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Here is all you need to know
Don't get caught without a spare temperature controller - keeping just one spare in stock can save you £000s in downtime instead of finding and waiting for your machine manufacturers replacement to arrive. ATR243-21ABC-T temperature controllers feature a universal analogue input which is selectable for over 15 different types of sensor and an extended wide range power supply of 24...230 VAC/DC.
Enjoy increased flexibility with the SSR-Relay-V/mA outputs which you can program as command, alarm or event, or even analogue retransmission. Programming and configuring your Pixsys multi-setpoint temperature controllers is easy thanks to the LABSOFTVIEW software and the handy memory card slot on the side of the unit.
Features | 1 Analogue input + 2 Relays 5 A + 1Ssr/V/mA + RS485 + TA |
Dimensions | 48x48 (front panel) x 125 mm |
Power Supply | 24...230Vac/dc ±15% 50/60 Hz (galvanic isolation) |
Consumption | 5,5 VA 4W |
Display | 4 digits 0,4 " green + 4 digits 0,3" red |
Operating conditions | Temperature 0-45 °C, humidity 35..95 uR% |
Material | Box: Noryl UL94V1 self-extinguishing, front panel: PC ABS UL94V0 self-extinguishing |
Weight | Approx. 165 g (-20ABC) -185 g (-21ABC/31ABC) |
Sealing | IP65 (Front panel) , IP20 (Box and Terminal bloks) |
Quick set-up options | Memory Card with / without battery, software LABSOFTVIEW, or EASY-UP codes |
1 x Configurable Input | Selection TC, K, J, S, R, PT100,PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4..20 mA, 0..10 V,0...40mV, Potentiometer 1...6/160 Kohm, T.A (1024 points) |
Sampling Time | Programmable up to 4,1 ms (Frequency up to 242 Hz) |
1 x Digitial Input | 1/2...4 setpoint change , Hold, Run, Tuning launch, Start/stop cycle |
1 x T.A Input | Selection T.A. 50 mA - 100 ms - 1024 points (codes -21/-31ABC) |
2 x Relays | Relay 5 A - 250 Vac resistive charge |
1 x SSR | 12 Vdc - 30 mA max |
1 x Analogue | Selection 4 - 20 mA or 0 - 10 Vdc for command or retransmission PV/SPV |
Serial communication | RS485 Modbus RTU - Slave |
Control algorithms | ON - OFF with hysteresis, P., P.I., PID., P.D. time proportioned |
Tuning | Manual or automatic |
Data protection | Lock of control / alarm setpoint, Access to parameters by password |
Alarm modes | Absolute / Threshold, Band, High / Low deviation. Alarm with optional manual reset. Loop Break Alarm function |
Auto / Man function | Output percentage command also with automatic change in case of sensor failure |
Double P.I.D. | Heating / Cooling P.I.D. |
Programmer function | Start / Stop pre-programmed cyle with 2/3 steps |
Soft-Start | Rising gradient expressed as Degrees / Hour |
Open / Close logic | Open / Close logic for motorized valves |
The below specs apply to this product
Manufacturer | Pixsys |
---|---|
No digital inps | 1 |
Range | ATR |
Range type | Temperature Controller |
Analogue output | 1 |
RS485 Modbus | 1 |
No of ssr outputs | 1 |
No of relay outputs | 2 |
Type of Outputs | relay / ssr / RS485 modbus / Analogue |
Number of Outputs | 4 |
Input Type | K / J / S / R / PT100 / PT500 / PT1000 / Ni100 / PTC1K / NTC10K (B 3435K) / 0..20 mA / 4..20 mA / 0..10 V / 0...40mV / Potentiometer 1...6/160 Kohm / Current Transformer |
No of TA inputs | 1 |
---|---|
No analogue inps | 1 |
IP Rating | IP65 |
Supply Voltage | 24???230V AC/V DC |
Display Type | led |
Panel Depth | 125 |
Front Size | 48x48mm (1/16 din) |
Control Function | ON-OFF / PID / Time Proportioned / Dead Band / Open/Close Valve Logic / Soft Start / Programmed cycle / Programmed Cycle / Double PID |
Display Colour | green / red |
No of display lines | 2 |
Digit Display | 4x2 |
Here are some PDFs you can download