You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Here is all you need to know
The Pixsys ATR401-23ABC is a multi-setpoint, dual input temperature controller. This controller measures 48x96 mm (1/8 Din) and is highly configurable, enabling the user to match the controller exactly to their application. There are two analogue inputs on the ATR401-23ABC that are selectable for a wide variety of sensors and can be related to mathematical operations such as mean, difference and addition.
All Pixsys temperature controllers are designed to be user friendly and easy to set up, thanks to the additional memory card slot and the programming and monitoring software LABSOFTVIEW. The ATR401-23ABC also has an extended supply range of 24...115/230 VAC/DC.
Part Number | ATR401-23ABC |
Box | 48x96 (front panel) x 123 mm |
Power Supply | 24...230 VAC/DC ±15% 50/60 Hz (with jumper 24-110...230 VAC) |
Consumption | 5.5 VA, 4W |
Display | 4 digits 0.4 inch green + 4 digits 0.3 inch red |
Operating Conditions | Temperature 0-45°C, humidity 35...95 RU% |
Material | Box: Noryl UL94V1 self extinguishing, front panel: Silicon rubber V0 |
Weight | Approx. 350 g |
Sealing | IP65 (front panel), IP20 (box and terminal block) |
Quick Setup Options | Memory card with/without battery, software LABSOFTVIEW, EASY-UP codes |
2 Configurables | Selection TC, K, J, S, R, PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4...20mA, 0...10V, Potentiometer 6/160 Kohm, T.A. |
Sampling Time | Programmable up to 4.1 ms (frequency up to 242 Hz) |
3 Relays | Relay 8 A - 250 VAC resistive charge |
1 SSR | 12 VDC - 25 mA max. |
Control Algorithms | ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned |
Tuning | Manual or automatic |
Data Protection | Lock of control/alarm setpoint, access to parameters by password |
Alarm Modes | Absolute/threshold, band, high/low deviation. Alarm with additional optional manual reset. Loop break alarm function |
Remote Setpoint | Common setpoint corresponding to AI2 (4...20mA/0...10V) |
Double P.I.D. | Heating/Cooling P.I.D. |
Double Input Mode | AI1 and AI2 inputs correlation as mean, difference or addition of process values |
Soft-Start | Rising gradient expressed as degrees/hour |
Open/Close Logic | Open/Close logic for motorised valves |
The below specs apply to this product
Manufacturer | Pixsys |
---|---|
No analogue inps | 2 |
Range | ATR |
Range type | Temperature Controller |
RS485 Modbus | 0 |
No of ssr outputs | 1 |
No of relay outputs | 3 |
Type of Outputs | relay / ssr / RS485 modbus |
Number of Outputs | 4 |
Input Type | K / J / S / R / PT100 / PT500 / PT1000 / Ni100 / PTC1K / NTC10K (B 3435K) / 0..20 mA / 4..20 mA / 0..10 V / Potentiometer 6/160 Kohm / Current Transformer |
No of TA inputs | 1 |
No digital inps | 1 |
---|---|
IP Rating | IP65 |
Supply Voltage | 24???230V AC/V DC |
Display Type | led |
Panel Depth | 123 |
Front Size | 48x96mm (1/8 din) |
Control Function | ON-OFF / PID / Time Proportioned / Open/Close Valve Logic / Double PID |
Display Colour | green / red |
No of display lines | 2 |
Digit Display | 4x2 |
Here are some PDFs you can download