You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Here is all you need to know
The Pixsys DRR245-21ABC-T is a multisetpoint controller. Beside operation as a multisetpoint PID controller, the DRR245-21ABC-T can be ideally used as a signals converter due to the universal analogue input that is selectable by parameters for up to 18 different signals. The analogue output is galvanically isolated and programmable for rescalable transmission of process/setpoint value.
Like all Pixsys controllers, the DRR245-21ABC-T is user-friendly due to its quick setup and simple operation. A memory card slot and the LABSOFTVIEW software make the controller easy to program and monitor.
Part Number | DRR245-21ABC-T |
Box | DIN3880, DIN EN50022 rail mounted |
Power Supply | 24...230 VAC/DC ± 15% 50/60 Hz (galvanic isolation) |
Consumption | 3 W |
Display | 4 digits 0.4 inch green + 4 digits 0.3 inch red |
Operating Conditions | Temperature 0-45°C, humidity 35...95 RU% |
Material | Box: Polycarbonate V0; front panel: silicon V0 |
Weight | Approx. 195 g |
Sealing | IP65 (front panel), IP20 (box and terminal blocks) |
Quick Setup Options | Memory card with/without battery , software LABSOFTVIEW, EASY-UP codes |
Wiring | With terminal extension |
1 Configurable | Selection TC, K, J, S, R, PT100,PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4..20 mA, 0..10 V,0...40mV, Potentiometer 1...6/160 Kohm, T.A (1024 points) |
Sampling Time | Programmable up to 4.1 ms (frequency up to 242 Hz) |
1 T.A. Input | Selection T.A. 50 mA - 100 msec - 1024 points |
1 Digital Input | 1/2...4 setpoints selection, hold, run, tuning launch, start/stop cycle |
2 Relays | Relays 5 A - 250 VAC resistive charge |
1 SSR | 12 VDC - 30 mA max |
1 Analogue | Selection 4-20 mA or 0 - 10 VDC for command or retransmission |
Serial Communication | RS485 Modbus RTU - Slave |
Control Algorithms | ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned |
Tuning | Manual or automatic |
Data Protection | Lock comand/alarm setpoint |
Alarm Mode | Absolute/Threshold, band, high/low deviation. Loop break alarm function |
Auto/man function | Output percentage command also with automatic change in case of sensor failure |
Double P.I.D. | Heating/Cooling P.I.D. |
Programmer Function | Start/Stop pre-programmed cycle with 2/3 steps |
Soft-Start | Rising gradient expressed as degrees/hour |
The below specs apply to this product
Manufacturer | Pixsys |
---|
Range | Other |
---|
Here are some PDFs you can download