You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Tu je všetko, čo potrebujete vedieť
Pixsys manufacture a huge range of temperature controllers suitable for numerous applications. The Pixsys ATR171-12ABC is one of the available controllers. Its has two analogue inputs which are selectable for a wide range of sensors, as well as being able to be related to mathematical functions. The outputs on the multi-setpoint temperature controller can be programmed as command, alarm, event or analogue retransmission.
Each ATR171-12ABC is 72x72mm in size with a four digit display. The series has an extended power range of 24...230 VAC/DC with galvanic isolation which enables one temperature controller to be used for a diverse range of applications. LabSoftView, which is Pixsys own programming and monitoring software, and the memory card slot make the temperature controller easy to program, configure and monitor. See below for more technical details about the ATR171-12ABC Pixsys temperature controller.
Box | 72x72 (front panel) x 99mm |
Power supply | 24...230VAC/DC ±15% 50/60Hz |
Consumption | 5.5 VA |
Display | 4 digits 0.5" green + 4 digits 0.3" red + 6 signalling LEDs |
Operating conditions | Temperature 0-45°C, 35...39 RH% |
Material | Box: Noryl UL94V1 self-extinguishing; front panel: silicon rubber V0 |
Weight | Approx. 250g |
Sealing | Front panel IP54 (with gasket), box IP30, terminal blocks IP20 |
Quick set-up options | Memory card with/without battery, software LABSOFTVIEW, EASY-UP codes |
1 configurable | Selection TC, K, J, S, R, PT100,PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4..20 mA, 0..10 V, 0...40mV, Potentiometer 1...6/160 Kohm. |
Sampling time | 4.1ms (frequency 242 Hz) |
1 digital input | 1...4 setpoints selection, Hold, Run |
2 Relay | 1 Relay 8 A - 250 VAC resistive charge |
1 Analogue | Selection SSR 12VDC - 30mA / 0...10V / 4...20mA |
Control algorithms | ON-OFF with hysteresis, P., P.I., P.I.S., P.S. time proportioned. Automatic / Manual regulation |
Tuning | Manual/Automatic |
Data protection | Lock of command/alarm setpoint - Access to parameters by password |
Alarm modes | Absolute/Threshold, band, High/Low deviation. Alarm with optional manual reset and activation delay. Dead band function |
Soft-start | Rising gradient expressed as Degrees/Hour |
Double P.I.D. | Heating/Cooling P.I.D. |
Programmer function | 3 steps pre-programmed cycle with start/stop |
Timer function | Controller function + decremental timer |
Uvedené špecifikácie sa vzťahujú k tomuto výrobku
Manufacturer | Pixsys |
---|---|
No analogue inps | 1 |
Range | ATR |
Range type | Temperature Controller |
RS485 Modbus | 0 |
No of ssr outputs | 1 |
No of relay outputs | 2 |
Type of Outputs | relay / ssr |
Number of Outputs | 2 |
Input Type | K / J / S / R / PT100 / PT500 / PT1000 / Ni100 / PTC1K / NTC10K (B 3435K) / 0..20 mA / 4..20 mA / 0..10 V / 0...40mV / Potentiometer 1...6/160 Kohm. |
No digital inps | 1 |
---|---|
IP Rating | IP65 |
Supply Voltage | 24???230V AC/V DC |
Display Type | led |
Panel Depth | 99 |
Front Size | 72x72mm |
Control Function | ON-OFF / PID / Programmed cycle / Programmed Cycle / Double PID |
Display Colour | green / red |
No of display lines | 2 |
Digit Display | 4x2 |
Tu sú niektoré súbory vo formáte PDF si môžete stiahnuť