You will get en email confirming that we have received your enquiry.
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
You will get en email confirming that we have received your enquiry.
One of our team will be in touch to confirm your part(s) specification and condition.
You will receive a comprehensive quote tailored to your specific needs.
Here is all you need to know
Often referred to as the Simatic S5-95U, the Siemens 6ES5 095-8MA05 is a programmable controller for medium performance range applications. The compact controller features; 16Kbytes of memory (8K for application), 16 x 24V DC inputs, 4 x Interrupt inputs, 16 x 24V DC 0.5A Outputs, 2 x 16-bit counters and 1 x Analogue Voltage Output 0-10V output.
The 6ES5095-8MA05 is the replacement for the 6ES5095-8MA01, 6ES5095-8MA02, 6ES5095-8MA03 and 6ES5095-8MA04. No modifications to your wiring and program are required to use the replacement controllers.
In 2013 the part was made obsolete by Siemens and is no longer fully support. That said the 6ES5095-8MA05 is still extensive used in industry particularly where space is at a premium and you can still get support from Northern Industrial. Part of the success of the S5-95U was the onboard analogue inputs and outputs that provide extremely short conversion times.
The 6ES5 095-8MA05 can be mounted directly on walls or mounting plates. For this purpose, you need four wall brackets that can be pushed into the four openings on the rear of the casing and then mounted on the wall using screws.
The S5-95U snaps onto a 35 mm standard mounting rail, which also accommodates the bus units for the external I/O modules. Optionally, the S5-90U can also be fitted on a 35 mm standard mounting rail.
The 6ES5095-8MA05 can be connected directly to a 24 V DC voltage supply. Power supply modules providing 1 A to 10 A (at 24 V) are available for connection to 115/230 V AC.
Input/Outputs | Onboard | Maximum |
Digital inputs / outputs | 32 | 480 |
Analog inputs / outputs | 9 | 41 |
Counter Inputs | 2 | 66 |
Interupt Inputs | 4 | 4 |
The I/O available to the controller can be expanded using expansion modules from the S5-100U range.
Many applications require PID control functions in addition to the usual control tasks. For this purpose, the operating system of the 6ES5095-8MA05 has a PID controller that can be called up from the program. The PID controller forms an integral part of the PLC's operating system and therefore takes up no space in the user memory.
User memory (1 statement - 2 bytes) | 16 KB | |
Execution time for 1024 binary statements | 2 ms | |
Flags (512 retentive) | 2048 | |
Counter (8 retentive) | 128 | |
Timers | 128 | |
Structed Programming | Yea | |
Interrupt drive program execution | Yes | |
Time controlled program execution | Yes | |
PID Controller | Yes | |
Standard fuction blocks | Yes |
A copy of STEP 5 and programming lead is required to program the S5-95U controller. Alternatively you can purchase the PG 605, part number 6es5 605-0UA12 which is a hand held programmer. To purchase the software, leads or PG laptop please contact one of the Northern Industrial team.
The 6ES5 095-8MA05 can be expanded with I/O modules of the S5-100U range. In total, 32 modules can be directly connected to the S5-95U. These modules provide increased functionality to the programmable logic controller.
Northern Industrial is able to provide the following modules:
The below specs apply to this product
Manufacturer | Siemens |
---|---|
Alternative Partnumber | 6ES5 095-8MA05 |
Range type | Processor Module |
Range | Simatic S5 |
---|---|
EAN | 4025515063322 |
Here are some PDFs you can download