You will get en email confirming that we have received your enquiry.
My Cart
Your cart
Eng
IC695CPU310
GE Fanuc 300MHZ 10MB CPU Module
2 year warranty*
Worldwide delivery
Returns accepted
*Manufacturer's warranty does not apply
300MHZ 10MB CPU Module
What happens next?
1. Email Confirmation
2. Dedicated Account Manager
One of our team will be in touch to confirm your part(s) specification and condition.
3. Your Quote
You will receive a comprehensive quote tailored to your specific needs.
About this product
Here is all you need to know
- GE Fanuc IC695CPU310
- RX3I CPU310 300MHZ 10MB CPU Module
- 2 year Northern Industrial Warranty
- Fully functionally tested, cleaned and factory reset (if necessary)
- Professionally refurbished
- Refurbished items may feature minor cosmetic blemishes and are not supplied with original packaging or accessories.
- Supplies are limited and subject to prior sale
The RX3i CPU can be used to perform real time control of machines, processes, and material handling systems. The IC695CPU310 communicates with the programmer and HMI devices via a serial port using SNP Slave protocol. It communicates with I/O and smart option modules over a dual backplane bus that provides:
- High-speed, PCI backplane for fast throughput of new advanced I/O.
- Serial backplane for easy migration of existing Series 90-30 I/O
Features
Contains 10 Mbytes of battery-backed user memory and 10 Mbytes of non-volatile flash user memory.
- Provides access to bulk memory via reference table %W. The upper limit of this memory area can be configured to the maximum available user RAM.
- Configurable data and program memory.
- Programming in Ladder Diagram, Structured Text, Function Block Diagram, and C.
- Supports auto-located Symbolic Variables that can use any amount of user memory.
- Reference table sizes include 32Kbits for discrete %I and %Q and up to 32Kwords each for analog %AI and %AQ.
- Supports most Series 90-30 modules and expansion racks. For a list of supported I/O, Communications, Motion, and Intelligent modules, see the PACSystems RX3i Hardware and Installation Manual, GFK-2314.
- Supports up to 512 program blocks. Maximum size for a block is 128KB.
- Bit-in-word referencing allows you to specify individual bits in a WORD reference in retentive memory as inputs and outputs of Boolean expressions, function blocks, and calls that accept bit parameters.
- In-system upgradeable firmware.
- Two serial ports: an RS-485 serial port and an RS-232 serial port.
- Ethernet communications via the rack-based Ethernet Interface module (IC695ETM001).
Operation
Operation of this module can be controlled by the threeposition RUN/STOP switch or remotely by an attached programmer and programming software. Program and configuration data can be locked through software passwords. The status of the IC695CPU310 is indicated by the eight CPU LEDs on the front of the module
RAM & Flash Memory
The IC695CPU310 has 10 Mbytes of battery-backed CMOS RAM memory for user data (program, configuration, register data, and symbolic variable) storage. The CPU has 10 Mbytes of built-in flash memory for user data (program, configuration, register data, and symbolic variable) storage. Use of this flash memory is optional.
Flash Memory in Storage Unit
This CPU uses non-volatile flash memory for storing the operating system firmware. This allows firmware to be updated without disassembling the module or replacing EPROMs. The operating system firmware is updated by connecting a PC compatible computer to the module’s RS-232 serial port and running the software included with the firmware upgrade kit
The Specs
The below specs apply to this product
| Manufacturer | GE Fanuc |
|---|
| Range | Other |
|---|
Looking for more details on this product?
Here are some PDFs you can download
